AIR-TO-WATER CHILLERS – ATLANTIA POWER KWP | KWB
atlantia powerKWP | KWB
Multiscroll air-to-water chillers
331-784 kW
Documentation & Features
Specifications table
Views & Dimensions
Controls
Documentation & Features
Commercial documentation
Available languages:
 |  |  |  |  |
Plate heat exchanger (KWP)Shell and tube heat exchanger (KWB)
Partial and total heat recovery system from hot gases for domestic hot water (DHW).
Water Free Cooling System for Free CoolingAdaptation and Environment
- Reduced charge of low GWP refrigerant R-454B, minimizing the CO₂ footprint (-77% less GWP than R-410A and -31% less than R-32).
- Series condensing pressure control for year-round operation.
- Adaptability to the installation with a wide range of models.
- Maximum accessibility and easy maintenance through removable panels.
- Versions with a hydraulic group and integrated buffer tank to reduce the frequency of compressor start-ups and shutdowns.
Energy Efficiency
- High energy efficiency at partial and full loads, reducing operating costs.
- Tandem multiscroll for improved seasonal energy efficiency.
- Electronic fans with AxiTop and electronic expansion valve as standard for minimal energy consumption.
- Units with a hydraulic group can incorporate high-performance electronic pumps.
Specifications table
General characteristics
KWB
KWP
Refrigerant
R454B
✓
✓
Equipment with refrigerant charge
✓
✓
R452B or R410A refrigerants (Check availability according to model)
●
●
Leak detection
●
●
Bodywork
Self-supporting bodywork/cabinet made of galvanised steel with oven cured polyester paint treatment
✓
✓
Customized color to suit the needs of the installation
●
●
Equipment without paneling
✓
✓
Enclosed compartment for compressors (1)
●
●
Perimeter enclosure of the unit + Enclosed compartment for compressors (1)
●
●
Insulation panels for the compressor compartment
●
●
Lower hydraulic enclosure (H version)
●
●
Upper hydraulic enclosure (H version)
●
●
Insulation panels for perimeter enclosure and hydraulic section panels (H version)
●
●
Anti-vibration supplements
●
●
Compressors
Multiscroll technology in tandem
●
●
Compressor anti-vibration mounts
✓
✓
Soft starter
●
●
Acoustic insulation jacket
●
●
Original high-performance acoustic insulation jacket from the manufacturer
●
●
Electronic expansion valves
✓
✓
Fans
KWB
KWP
Outdoor fans
Axial fans enhanced with EC technology
✓
✓
Curved external nozzle
✓
✓
Heat exchangers
KWB
KWP
Coils
Cu tube and Al fin coils
✓
✓
Al / Al microchannel batteries
●
●
Cu tube bundle / polyurethane pre-lacquered Al fins
●
●
ALUCOAST: high-strength Cu tubes / Al fins
●
●
BLYGOLD: Cu tubes / Al fins with Blygold coating
●
●
COPPERFIN: Cu tubes / Cu fins
●
●
Heat exchangers
Refrigerant-water heat exchanger, AISI 316L stainless steel plates, copper-welded, and thermally insulated
–
✓
Shell-and-tube heat exchanger
✓
–
Stainless steel heat exchanger SS AISI 304 / SS AISI 316 / Sealix
–
●
Energy (2)
KWB
KWP
Energy recovery
Partial recovery of condensation energy for domestic hot water (DHW)
●
●
Total recovery of condensation energy for domestic hot water (DHW)
(* In KWP, only possible in series 2)
(** Heat exchanger in total recovery circuit: plate in KWP and multitube in KWB)
(* In KWP, only possible in series 2)
(** Heat exchanger in total recovery circuit: plate in KWP and multitube in KWB)
●
●
Pump in the condensation heat recovery circuit
●
●
Electric anti-icing heater in the plate heat exchanger for domestic hot water (DHW) recovery
●
●
Free-cooling
Integrated free-cooling, via additional V-shaped coils, external sensor, and three-way valve
●
●
Hydraulic (2)
KWB
KWP
Pumps (version P/H)
Single pump, normal available pressure (7-12 mH₂O)
✓
✓
Single pump with high pressure available (15-20 mH₂O)
●
●
Single pump, very high available pressure (25-30 mH₂O)
●
●
Pump with variable speed drive
●
●
Backup pump (standard pressure, high pressure, and very high pressure available)
●
●
Electronic pump
●
●
Electronic backup pump
●
●
Hydraulic components
Low temperature kit for operation with water outlet temperature < 0 ºC
●
●
Low outdoor temperature kit
●
●
Flexible water inlet and outlet connections
●
●
Water filter
●
●
Installation of pressure gauges at the inlet and outlet of the equipment for S version
●
●
Independent module with 200 liters / 375 liters / 725 liters + buffer tank available
Electrical resistances
Electrical resistances
●
●
Installation
KWB
KWP
Protection grilles
Coil protection grille
●
●
Bird-proof protection grille at the base of the equipment
●
●
Insulation
Thermal insulation in all cold metal lines (refrigerant or water)
●
●
Power supply
400 V / III ph / 50 Hz without neutral
✓
✓
400 V / III ph / 60 Hz
●
●
Other electrical voltages (see different options available)
●
●
Packaging
Packaging for maritime transport
●
●
Control
KWB
KWP
Electronic control and communication
Programmable electronic control AQUAMATIX
✓
✓
Climatix HMI user terminal for AQUAMATIX control
✓
✓
RS485 communication interface for ModBus communication
✓
✓
Modbus TCP/IP and BACnet IP communication
✓
✓
Defrosting
Defrosting by cycle reversal using a 4-way valve
✓
✓
Additional control and safety components
Main switch in electrical panel
✓
✓
Magneto-thermal protections for compressors, fans and pumps
✓
✓
Differential switches
●
●
Low pressure switch for pump protection
●
●
PREMIUM phase control relay, with phase failure detection and direction of rotation protection
✓
✓
EXCELLENT phase monitoring relay, adds phase unbalance, overvoltage and undervoltage detection
●
●
Triple protection for the plate heat exchanger with a water flow switch and anti-freeze protections for both water and refrigerant
✓
✓
Energy meter
●
●
Electrical panel
Fully wired electrical panel, with IP54 protection
✓
✓
Forced ventilation of the electrical panel
✓
✓
Design of electrical switchgear for high temperatures
✓
✓
Tropicalised electrical panel
●
●
Socket for common use
●
●
Antifreeze electrical resistor in electrical panel for low outdoor temperatures
●
●
Views & Dimensions
Series 2-4 – KWP S version / KWB S and P versions
The number of views for the equipment depends on the series; the views in this image correspond to series 3.
Series 2-4 – KWP P and H versions / KWB H version
| Dimensions KWB / KWP (mm) | |||
|---|---|---|---|
| Series KWP – S version | KWP-2 | KWP-3 | KWP-4 |
| Series KWB – versions S and P | KWB-2 | KWB-3 | KWB-4 |
| L | 2980 | 4425 | 5750 |
| W | 2100 | 2100 | 2100 |
| H | 2480 | 2480 | 2480 |
| Dimensions KWB / KWP (mm) | |||
|---|---|---|---|
| Series KWP – P and H versions | KWP-2 | KWP-3 | KWP-4 |
| Series KWB – H version | KWB-2 | KWB-3 | KWB-4 |
| Versions P/H | |||
| L | 4305 | 5750 | 7075 |
| W | 2100 | 2100 | 2100 |
| H | 2480 | 2480 | 2480 |
• Some options require a chassis change for the equipment. To know the dimensions of each series with the different available options,
please contact us.
Controls
ATLANTIA POWER includes the programmable electronic control AQUAMATIX and the Climatix HMI user terminal.
It is compatible with RS485 card for Modbus communication and BACnet IP communication system.
GET IN TOUCH WITH US
How can we help you?
Are you looking for (custom-made) HVAC+R solutions or do you have any questions?
Feel free to contact us.